DOES TEXTURED COATING CONTAIN ASBESTOS?
Does Textured Coating Contain Asbestos?
Textured Coating commonly by its trade Artex has been used for decades all over the world. The material has various names and visual appearances depending upon the makeup. In the UK asbestos was often added into Textured Coating materials up until the end of 1999 to improve the hardiness of the product and the fire resistance.
As with any material that could contain asbestos it is always recommended to have the material tested for asbestos prior to any disturbance. If left in a good condition and painted Asbestos Textured Coating can remain in situ and poses a low risk. It is only when the material is disturbed that it can pose a risk to health from Asbestos Exposure.
Asbestos Textured Coating or Artex can be found on internal walls, ceilings, stairs, external renders and coatings.
There is no way to tell if asbestos is in Artex without it going under a microscope in a laboratory.
The Importance Of Sampling Textured Coating Before Asbestos Removal
It is vitally important that you test for asbestos prior to removing Artex or Textured Coating. Without a test you could be paying for asbestos to be removed that is not even positive for asbestos. Alternately you may be removing an asbestos containing material that is harmful to your health or your contractors and possibly contaminating your home or workplace.
If in doubt get it tested - Call 08081753663 to have your material tested today.
Do I Need To Remove Asbestos Textured Coating?
If Asbestos Textured Coating is found within your home or workplace it may not be necessary to remove it. If the material is in good condition and sealed or painted then it can often be left in situ undisturbed and remain there for many years. The material may require an Asbestos Management Plan to comply with The Control of Asbestos Regulations 2012 (CAR2012).
Ensuring Safe And Professional Asbestos Textured Coating Removal
The removal of Asbestos Textured Coating is often a very destructive and potentially hazardous operation. It requires the use of enclosures, trained personnel, asbestos H-Vac units, air testing and hazardous waste transport. As such it is best left to the professionals. The material is physically scraped off or the entire panels are removed leaving a fully cleaned area. The Textured Coating should be coated in X-Tex to bind the material and aid in the safe removal process.
Air testing and visual assessments are then undertaken by an independent UKAS accredited laboratory to ensure all works have been completed and the area is safe to enter.
If you need help with Asbestos Removal of Artex or Textured Coating please call 08081753663 or contact us on the form below.
If you're interested in learning more about Asbestos or have concerns check out our blog posts here or contact us.
FOR ASBESTOS Textured Coating IDENTIFICATION/TESTING/REMOVAL
Asbestos Surveys near me
Asbestos Removal near me
Asbestos Sampling near me
Asbestos in Soils near me
Re-Inspection near me
GET YOUR FREE NO OBLIGATION QUOTE TODAY!
Fill in the form below and we will come back to you shortly!